PLAYSTATION 3 SOFTWARE
Playstation 3 has many update since these game console created, and I wanna share about this file.
3.55 & 3.41 Custom Firmwares Playstation 3
- Geohot 3.55 Custom Firmware Download -PS3UPDAT.PUP
- Kmeaw 3.55 Custom Firmware Download - PS3UPDAT.PUP
- Rebug 3.55 Custom Firmware Download - Codename: Rebug
- Rebug 3.41 Custom Firmware Download - Codename: Rebug
- CFW 3.55 OtherOS Special (Thanks to Chips 98) - PS3UPDAT.PUP
___________________________________________________________________________
4.XX Custom Firmwares Playstation 3
(You must be on firmware 3.55 or earlier to install these.)
- Rogero 4.21 Custom Firmware - Rogero4.21
v1.09 Details and Changes
- Compatibility problem with some Slim models (CECH-25xx) is now fully fixed.
- XMB Icons problem from in-game PS button is now fixed.
- Loading games from App_home Icon is now fixed.
- Many other fixes from version 1.00 for a better performance and added stability.
- It was tested by hundreds of testers on all PS3 models (FAT & Slim) and no problems were encountered.
- It can run games signed with Keys up to version 4.21 without any Eboot/Sprx patching needed
- Games can be loaded from Disc Icon (with Original game in BD) and from app_home (Disc-less, but not all games).
- Current 3.55 homebrew applications can't be loaded on this CFW, applications must be re-signed properly for FW4.21.
Updating from CFW4.21 v1.00 to the CFW4.21 v1.09 should be done using the following steps :
1- Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )
---- Downgrade back to ver3.55 using the guide above.
---- Once on Rogero CEX3.55 v3.7 you can update again from Recovery Menu into the new CFW4.21 v1.09
2- Alternative Way ( CFW4.21 v1.00 --> Recovery Menu --> CFW4.21 v1.09 )
---- You can try updating from CFW4.21 v1.00 to CFW4.21 v1.09 from Recovery Mode first.
---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21 v1.00 --> CFW3.55 --> CFW4.21 v1.09 )]]]]
source : Rogero CEX-4.21 CFW & LV0 Keys Released
Requirements:
A USB Flash drive (Must be big enough to accommodate the installation files) or a PS3 External Hard Drive or just a plain External HD
A PS3 running Official Firmware version 3.55 or
A PS3 running on any CFW ver: 3.55/4.21/4.30/4.40
This also works for PS3’s running Rogero 4.40 V1.02 (this is an update duh)
This will NOT WORK on PS3′s running any Official Firmware higher than 3.55 (you will need to downgrade to 3.55 first.)
Also, if you come from a downgraded PS3 (you were on an official firmware 3.60 or higher and then downgraded to 3.55) you would need to Dehash your PS3 first. (no need to dehash if you are already on any of these CFW versions: 4.21/4.30/4.40)
Here are the steps:
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
Note: If you are installing from 3.55, remember to Toggle QA Flag first for a safer install. If you do not know how to do it, here is a tutorial on How to Toggle QA Flag.
1. Download the file “Rogero_CEX_4.40_v1.03.PUP“ and rename it to PS3UPDAT.PUP
2. Create a new folder on the Root of your USB flash drive or External HD and name it “PS3” ( it would look like this: x:PS3 where X is the drive)
3. Create a new folder inside the “PS3” folder we just created and name it “UPDATE” . ( it would now look like this: x:PS3/UPDATE)
4. Copy the PS3UPDAT.PUP file we renamed and place it inside the “UPDATE” folder we just created. ( it should now go something like this: x:PS3/UPDATE/PS3UPDAT.PUP)
5. Insert your USB or External HD into your PS3
6. Turn on your PS3, go to System update and select “Update via Storage Media”
7. Just follow any on screen instructions that would come up.
8. And you’re done!
Alternate installation via Recovery Mode:
(Note: This is assuming you already have the installation files ready on your USB flash drive or External HD , if not follow steps 1 to 5 from above before proceeding)
1. While your PS3 is on, turn it off by pressing and holding the power button until it turns off
2. When the PS3 is OFF, press and hold the power button until you hear two beeps
3. When this happens, the PS3 should boot up in recovery Mode (if it does not, repeat steps 1 and 1)
4. While on recovery mode, select option 6 (System Update)
5. Just follow any on screen instructions that would come up.
6. And you’re done!
Important!
Older versions of Multiman will not work on Rogero 4.40 V1.03, and you would need to update to the latest version of Multiman which is 4.30.00. Here’s the link on How to install Multiman 4.30.00.)))
source : How to install Rogero 4.40 v1.03 on your PS3
Enjoy naaaa.... guys..
- ErmaC 4.30 Custom Firmware - ErmaC 4.30 CFW 1.4.rar
- Rogero 4.40 Custom Firmware (Thanks to Wolf) - Rogero_CEX-4.40_v1.03.PUP
(((INSTRUCTION :
Requirements:
A USB Flash drive (Must be big enough to accommodate the installation files) or a PS3 External Hard Drive or just a plain External HD
A PS3 running Official Firmware version 3.55 or
A PS3 running on any CFW ver: 3.55/4.21/4.30/4.40
This also works for PS3’s running Rogero 4.40 V1.02 (this is an update duh)
This will NOT WORK on PS3′s running any Official Firmware higher than 3.55 (you will need to downgrade to 3.55 first.)
Also, if you come from a downgraded PS3 (you were on an official firmware 3.60 or higher and then downgraded to 3.55) you would need to Dehash your PS3 first. (no need to dehash if you are already on any of these CFW versions: 4.21/4.30/4.40)
Here are the steps:
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
Note: If you are installing from 3.55, remember to Toggle QA Flag first for a safer install. If you do not know how to do it, here is a tutorial on How to Toggle QA Flag.
1. Download the file “Rogero_CEX_4.40_v1.03.PUP“ and rename it to PS3UPDAT.PUP
2. Create a new folder on the Root of your USB flash drive or External HD and name it “PS3” ( it would look like this: x:PS3 where X is the drive)
3. Create a new folder inside the “PS3” folder we just created and name it “UPDATE” . ( it would now look like this: x:PS3/UPDATE)
4. Copy the PS3UPDAT.PUP file we renamed and place it inside the “UPDATE” folder we just created. ( it should now go something like this: x:PS3/UPDATE/PS3UPDAT.PUP)
5. Insert your USB or External HD into your PS3
6. Turn on your PS3, go to System update and select “Update via Storage Media”
7. Just follow any on screen instructions that would come up.
8. And you’re done!
Alternate installation via Recovery Mode:
(Note: This is assuming you already have the installation files ready on your USB flash drive or External HD , if not follow steps 1 to 5 from above before proceeding)
1. While your PS3 is on, turn it off by pressing and holding the power button until it turns off
2. When the PS3 is OFF, press and hold the power button until you hear two beeps
3. When this happens, the PS3 should boot up in recovery Mode (if it does not, repeat steps 1 and 1)
4. While on recovery mode, select option 6 (System Update)
5. Just follow any on screen instructions that would come up.
6. And you’re done!
Important!
Older versions of Multiman will not work on Rogero 4.40 V1.03, and you would need to update to the latest version of Multiman which is 4.30.00. Here’s the link on How to install Multiman 4.30.00.)))
source : How to install Rogero 4.40 v1.03 on your PS3
___________________________________________________________________________
Official Firmwares Playstation 3
- Official Firmware 3.55 Download PS3UPDAT.PUP
- Official Firmware 3.41 Download: PS3UPDAT.PUP
.bmp)
No comments:
Post a Comment